| Subject name (in Hungarian, in English) | Master Thesis Project B | |||
|
Final Project B
|
||||
| Neptun code | BMEGEENNKDB | |||
| Type | study unit based on individual work, aided by consultation, without contact hours | |||
| Course types and number of hours (weekly / semester) | course type: | lecture (theory) | exercise | laboratory excercise |
| number of hours (weekly): | 0 | 12 | 0 | |
| nature (connected / stand-alone): | - | individual | - | |
| Type of assessments (quality evaluation) | mid-term grade | |||
| ECTS | 15 | |||
| Subject coordinator | name: | Dr. Laza Tamás | ||
| post: | adjunct | |||
| contact: | laza@energia.bme.hu | |||
| Host organization | Department of Energy Engineering | |||
| http://energia.bme.hu | ||||
| Course homepage | http://energia.bme.hu | |||
| Course language | hungarian | |||
| Primary curriculum type | mandatory | |||
| Direct prerequisites | Strong prerequisite | none | ||
| Weak prerequisite | ||||
| Parallel prerequisite | ||||
| Milestone prerequisite | at least obtained 80 ECTS | |||
| Excluding condition | none | |||
Aim
The aim of the course is for the student to acquire the techniques used in the engineering practice related to energy and energy machines within the framework of the diploma design project, to acquire an independent problem-solving practice. During the diploma design task, he demonstrates his maturity for solving engineering tasks to a high standard by solving and documenting tasks related to various topics. During the diploma planning, he / she carries out independent engineering work under the guidance of the supervisor of the department - sometimes his / her plant consultant.
Learning outcomes
Competences that can be acquired by completing the course
Knowledge
With the help of the supervisor, the student names the main content elements of the updated dissertation to be written about a chosen segment of the field. With the help of the supervisor, the student describes the main tasks of the diploma thesis to be written about a chosen segment of the field in the dissertation. With the help of the knowledge acquired during your training, you will gather the additional knowledge necessary to complete the diploma thesis. With the help of his prior knowledge, he systematizes the new knowledge gained during the reading of the literature. The student has the knowledge needed to analyze the literature reviewed. The student is aware of the knowledge required to perform the tasks in the job description at the appropriate level. It identifies challenges that would require a departure from the terms of reference or an extension of the scope of the tasks. He has the knowledge to consult effectively with his supervisor. With the help of the background, the student summarizes the abstract of the diploma thesis, is able to distinguish the content and size of each chapter. The student has the knowledge to propose changes to the terms of reference if necessary.
Ability
The student understands the tasks in the job description correctly. The student specifies the correct order in which the tasks detailed in the job description are performed. The student identifies the range of literature that still needs to be reviewed in order to properly prepare your dissertation. The student describes the relevant knowledge found in the literature in your dissertation. The student analyzes the literature reviewed in the light of what has been learned previously. The student applies the professional knowledge acquired during his studies so far during the elaboration of the master thesis. The student adequately addresses emerging challenges that would require deviating from the job description or expanding the tasks. In the course of his work, the student prepares the results of the literature reviewed or the analysis carried out in order to make the consultations with his / her supervisor effective. The student outlines the thesis abstract according to each chapter and content constraints. The student proposes to the supervisor to modify the dissertation of the dissertation if the need arises.
Attitude
The student constantly monitors his / her work, results and conclusions with the help of his supervisor and consultant. The student expands his / her knowledge of the chosen nuclear field by continuously acquiring knowledge. The student is open to using information technology tools and acquiring new skills when needed. The student strives to get to know the system of tools needed for technical problem solving, to use it error-free and routinely. The student develops your ability to provide accurate and error-free problem solving, engineering precision and accuracy.
Independence and responsibility
The student collaborates with the supervisor and consultant, as well as fellow students as needed, to expand the knowledge. During the preparation of the dissertation, the student accepts the well-founded professional and other critical remarks. He / she constantly cooperates with his / her supervisor, consultant and, if necessary, fellow students during the elaboration of his / her master thesis. With his / her knowledge, the student makes a responsible, well-founded and independent decision based on his analyzes. The student feels responsible for energy, the problems of energy management and the sustainable use of the environment, as well as present and future generations.
Teaching methodology
The subject is a unit without contact lessons. The student works independently on a complex task during the semester. He tries to solve the problems that arise during the solution of the task on his / her own. The student uses the help of his supervisor and plant consultant only when making strategic decisions. During the solution of the task, the student uses the knowledge and skills acquired during the training to solve the task.
Support materials
Textbook
Paul Gruba, Justin Zobel: How To Write Your First Thesis, Springer Verlag, 2017, ISBN: 978-3-319-61853-1
Lecture notes
No book or note is yet available for the subject when filling in the form, its earliest publication date is 2020.
Online material
Validity of the course description
| Start of validity: | 2019. September 1. |
| End of validity: | 2028. July 15. |
General rules
The evaluation of the performance is determined by the supervisor on the basis of the prepared master thesis. The master thesis is determined on the basis of the elaboration of the topic, the standard of the performed engineering, the quality of the processing of the literature related to the topic, the formal, aesthetic appearance, division and logical structure of the dissertation. The aspects of the scoring must be made on the basis of the evaluation form according to the current Faculty Regulations.
Assessment methods
Detailed description of mid-term assessments
| Mid-term assessment No. 1 | ||
| Type: | formative assessment, project-based, complex | |
| Number: | 1 | |
| Purpose, description: | The evaluation of the performance is determined by the supervisor on the basis of the prepared master thesis. The master thesis is determined on the basis of the elaboration of the topic, the standard of the performed engineering, the quality of the processing of the literature related to the topic, the formal, aesthetic appearance, division and logical structure of the dissertation. The aspects of the scoring must be made on the basis of the evaluation form according to the current Faculty Regulations. | |
Detailed description of assessments performed during the examination period
The subject does not include assessment during the examination period.
The weight of mid-term assessments in signing or in final grading
| ID | Proportion |
|---|---|
| Mid-term assessment No. 1 | 100 % |
The condition for signing is that the score obtained in the mid-year assessments is at least 40%.
The weight of partial exams in grade
There is no exam belongs to the subject.
Determination of the grade
| Grade | ECTS | The grade expressed in percents |
|---|---|---|
| very good (5) | Excellent [A] | above 92 % |
| very good (5) | Very Good [B] | 85 % - 92 % |
| good (4) | Good [C] | 72 % - 85 % |
| satisfactory (3) | Satisfactory [D] | 65 % - 72 % |
| sufficient (2) | Pass [E] | 50 % - 65 % |
| insufficient (1) | Fail [F] | below 50 % |
The lower limit specified for each grade already belongs to that grade.
Attendance and participation requirements
At least 70% the exercises (rounded down) must be actively attended.
Special rules for improving, retaken and replacement
The special rules for improving, retaken and replacement shall be interpreted and applied in conjunction with the general rules of the CoS (TVSZ).
| Can the submitted and accepted partial performance assessments be resubmitted until the end of the replacement period in order to achieve better results? | ||
| NO | ||
| Taking into account the previous result in case of improvement, retaken-improvement: | ||
| new result overrides previous result | ||
| The way of retaking or improving a partial assessment for the first time: | ||
| partial assesment(s) in this group cannot be improved or repeated, the final result is assessed in accordance with Code of Studied 122. § (6) | ||
Study work required to complete the course
| Activity | hours / semester |
|---|---|
| participation in contact classes | 168 |
| mid-term preparation for practices | 84 |
| elaboration of a partial assessment task | 30 |
| additional time required to complete the subject | 168 |
| altogether | 450 |
Validity of subject requirements
| Start of validity: | 2019. September 1. |
| End of validity: | 2028. July 15. |
Primary course
The primary (main) course of the subject in which it is advertised and to which the competencies are related:
Energy engineering
Link to the purpose and (special) compensations of the Regulation KKK
This course aims to improve the following competencies defined in the Regulation KKK:
Knowledge
- Student has the knowledge of the scientific and technical theory and practice closely related to the profession of energy engineer, with an appropriate level of manual skills.
- Student has the knowledge of metrology and measurement theory in the field of energy.
- Student has the knowledge of the process and methodology of energy management and planning.
Ability
- Student has the ability to process, organise and analyse information collected during the operation of energy and energy supply systems and processes and to draw conclusions from this information.
- Student has the ability to apply and develop procedures, models and information technologies used in the design, organisation and operation of energy machines, systems and processes.
- Student has the ability to take a multi-disciplinary, interdisciplinary approach to and solve specialised problems within student's field of specialisation.
Attitude
- Student shall apply a systems and process-oriented approach to student's activities, based on a complex approach, with a focus on sustainability and energy awareness.
- Student cooperates with representatives of other disciplines.
- Student is open to critical feedback on its activities.
Independence and responsibility
- Student shares the knowledge and experience with those in the field through formal, non-formal and informal information transfer.
- Student has the ability to work independently on engineering tasks.
- Student takes initiative in solving technical problems.
Prerequisites for completing the course
|
Knowledge type competencies
(a set of prior knowledge, the existence of which is not obligatory, but greatly facilitates the successful completion of the subject) |
none |
|
Ability type competencies
(a set of prior abilities and skills, the existence of which is not obligatory, but greatly contributes to the successful completion of the subject) |
none |