| Subject name (in Hungarian, in English) | Machine design | |||
|
Machine Design
|
||||
| Neptun code | BMEGEGIBGMD | |||
| Type | study unit with contact hours | |||
| Course types and number of hours (weekly / semester) | course type: | lecture (theory) | exercise | laboratory excercise |
| number of hours (weekly): | 1 | 0 | 1 | |
| nature (connected / stand-alone): | - | - | coupled | |
| Type of assessments (quality evaluation) | exam | |||
| ECTS | 4 | |||
| Subject coordinator | name: | Dr. Zwierczyk Péter Tamás | ||
| post: | adjunct | |||
| contact: | z.peter@gt3.bme.hu | |||
| Host organization | Department of Machine and Product Design | |||
| http://www.gt3.bme.hu | ||||
| Course homepage | http://www.gt3.bme.hu | |||
| Course language | english | |||
| Primary curriculum type | mandatory | |||
| Direct prerequisites | Strong prerequisite | none | ||
| Weak prerequisite | ||||
| Parallel prerequisite | ||||
| Milestone prerequisite | at least obtained 0 ECTS | |||
| Excluding condition | none | |||
Aim
Structural structure, design, behavior analysis of mechanical structures (strength and stiffness control), learning about behavior modeling possibilities. Overview of various aspects of strength design and verification. Familiarization and practice of modeling features and the process of finite element model creation through the determination of the stress state of simpler structural elements.
Learning outcomes
Competences that can be acquired by completing the course
Knowledge
You know the process of structural analysis and finite element modeling. You know the basic element types used in finite element modeling. You know the process of static analysis of components. Knowledgeable in the use of loads and boundary conditions applicable during mechanical finite element tests. Understands the process of solving simpler heat conduction problems. Knowledgeable in general sizing principles and methods. Understands the design guidelines for welded joints, the dimensioning of welded seams. Informed about the most important properties of the raw materials most often used in mechanical engineering structures. He is in possession of the design guidelines for simpler steel structures and related regulations, welded, bolted and riveted joints, rod structures and their joint design. Has the basic knowledge required to perform error mode and effect analysis.
Ability
Able to use a finite element model for the static analysis of parts, display and interpret the results. It is capable of finite element modeling of assemblies consisting of simpler parts. Able to interpret, characterize and model the construction and operation of the structural units and elements of mechanical engineering systems, the design and connection of the applied systems. Apply the calculation and modeling principles and methods of mechanical design. It prepares the process for solving simpler heat conduction problems. With his knowledge of information technology, he handles complex, computationally demanding tasks. Apply design guidelines for welded joints, dimensioning of welded seams. Explains the phenomenon of fatigue and the basics of its sizing. It applies the design guidelines of simpler steel structures and related regulations. Uses the basic knowledge required to perform error mode and effect analysis.
Attitude
It supports the expansion of knowledge with the instructor and fellow students. He expands his knowledge of finite element modeling by continuous knowledge acquisition. Open to the use of information technology tools. It strives to learn and routinely use the tool system required for finite element problem solving. He strives for accurate and error-free task solutions.
Independence and responsibility
Independently thinks through mechanical finite element tasks and problems and solves them based on given sources. Accepts critical comments made during task solving. In some situations - as part of a team - he cooperates with his fellow students in solving tasks. He is committed to the systematic approach in his thinking. Based on his knowledge and analysis, he makes a responsible, well-founded decision.
Teaching methodology
During the teaching of the subject, lectures are given in the case of theory (1 hour per week), and in the case of exercises, computer laboratory sessions (1 hour per week) take place in writing and orally. Modern computer tools and techniques are used during the practical classes, during tasks prepared independently and in optional group work, which are organically connected to the lectures.
Support materials
Textbook
O.C. Zienkiewicz, R.L. Taylor, The finite element method – fifth edition, Volume 1: The Basis. Butterworth-Heinemann, 2000, Oxford (MA), ISBN:9780750650496
O.C. Zienkiewicz, R.L. Taylor, The finite element method – fifth edition, Volume 2: Solid mechanics. Butterworth-Heinemann, 2000, Oxford (MA), ISBN:9780750650557
Lecture notes
Online material
Validity of the course description
| Start of validity: | 2023. February 1. |
| End of validity: | 2028. January 31. |
General rules
The learning results are evaluated based on a mid-year written performance assessment (a summative study performance evaluation), a homework assignment (partial performance evaluation), and an exam at the end of the semester. The midterm assignments must be presented in class according to the schedule and then submitted. The summative academic performance evaluator asks for the material of the practical lessons. The end-of-semester exam builds on the knowledge presented in the lecture and exercises.
Assessment methods
Detailed description of mid-term assessments
| Mid-term assessment No. 1 | ||
| Type: | summative assessment | |
| Number: | 1 | |
| Purpose, description: | The complex, written evaluation of the subject and the knowledge and ability-type competency elements is done in the form of a summative academic performance evaluation. This means that the practical tasks must be solved during the performance evaluation. The course material on which the evaluation is based is determined by the lecturer of the subject in agreement with the practice supervisors. | |
| Mid-term assessment No. 2 | ||
| Type: | formative assessment, simple | |
| Number: | 1 | |
| Purpose, description: | It is a complex evaluation method for the subject's knowledge, ability, attitude, and independence and responsibility competence elements, which takes the form of individually prepared homework. The content, requirements, submission deadline and evaluation method of the homework are determined by the supervisor and published to the students. During the semester, an independently prepared homework must be completed. | |
Detailed description of assessments performed during the examination period
Elements of the exam:
| Written partial exam | ||
| Obligation: | mandatory (partial) exam unit, failing the unit results in fail (1) exam result | |
| Description: | It is a complex evaluation method for the subject's knowledge, ability, attitude, and independence and responsibility competency elements, which takes the form of a written exam. The content, requirements, duration and evaluation method of the exam are determined and published by the lecturer during the diligence period. The written exam is based on the lecture and laboratory materials given during the semester. | |
| Oral partial exam | ||
| Obligation: | does not apply | |
| Description: | ||
| Practical partial exam | ||
| Obligation: | does not apply | |
| Description: | ||
| Inclusion of mid-term results | ||
| Obligation: | mandatory (partial) exam unit, failing the unit results in fail (1) exam result | |
| Description: | The results of the partial performance evaluation (homework) and the laboratory summary performance evaluation paper prepared during the hard work period of the semester count for 40% of the final exam grade. To pass the exam, it is essential to achieve a minimum of 40% on the written exam. After that, only the midterm work can be counted in the final grade, otherwise the written exam grade is automatically insufficient. | |
The weight of mid-term assessments in signing or in final grading
| ID | Proportion |
|---|---|
| Mid-term assessment No. 1 | 50 % |
| Mid-term assessment No. 2 | 50 % |
The condition for signing is that the score obtained in the mid-year assessments is at least 40%.
The weight of partial exams in grade
| Type: | Proportion |
|---|---|
| Written partial exam | 60 % |
| Inclusion of mid-term results | 40 % |
Determination of the grade
| Grade | ECTS | The grade expressed in percents |
|---|---|---|
| very good (5) | Excellent [A] | above 90 % |
| very good (5) | Very Good [B] | 85 % - 90 % |
| good (4) | Good [C] | 70 % - 85 % |
| satisfactory (3) | Satisfactory [D] | 55 % - 70 % |
| sufficient (2) | Pass [E] | 40 % - 55 % |
| insufficient (1) | Fail [F] | below 40 % |
The lower limit specified for each grade already belongs to that grade.
Attendance and participation requirements
Must be present at at least 70% (rounded down) of lectures.
At least 70% of laboratory practices (rounded down) must be actively attended.
Special rules for improving, retaken and replacement
The special rules for improving, retaken and replacement shall be interpreted and applied in conjunction with the general rules of the CoS (TVSZ).
| Need mid-term assessment to invidually complete? | ||
| yes | ||
| Can the submitted and accepted partial performance assessments be resubmitted until the end of the replacement period in order to achieve better results? | ||
| NO | ||
| The way of retaking or improving a summary assessment for the first time: | ||
| each summative assessment can be retaken or improved | ||
| Is the retaking-improving of a summary assessment allowed, and if so, than which form: | ||
| retake or grade-improving exam possible for each assesment separately | ||
| Taking into account the previous result in case of improvement, retaken-improvement: | ||
| new result overrides previous result | ||
| The way of retaking or improving a partial assessment for the first time: | ||
| partial assesment(s) in this group cannot be improved or repeated, the final result is assessed in accordance with Code of Studied 122. § (6) | ||
| Completion of unfinished laboratory exercises: | ||
| missed laboratory practices may be performed in the repeat period, non-mandatory | ||
| Repetition of laboratory exercises that performed incorrectly (eg.: mistake in documentation) | ||
| incorrectly performed laboratory practice (e.g. Incomplete/incorrect report) can be corrected by repeating the practice | ||
Study work required to complete the course
| Activity | hours / semester |
|---|---|
| participation in contact classes | 28 |
| preparation for laboratory practices | 14 |
| preparation for summary assessments | 16 |
| elaboration of a partial assessment task | 4 |
| exam preparation | 28 |
| additional time required to complete the subject | 30 |
| altogether | 120 |
Validity of subject requirements
| Start of validity: | 2023. February 1. |
| End of validity: | 2028. January 31. |
Primary course
The primary (main) course of the subject in which it is advertised and to which the competencies are related:
Mechanical engineering
Link to the purpose and (special) compensations of the Regulation KKK
This course aims to improve the following competencies defined in the Regulation KKK:
Knowledge
- Student has the knowledge of information and communication technologies in the field of engineering.
- Student has the knowledge and understanding of computer modelling and simulation tools and methods relevant to the field of engineering.
Ability
- Student has the ability to apply and develop procedures, models and information technologies used in the design, organisation and operation of engineering systems and processes.
Attitude
- Using student's technical knowledge, Student will seek to gain a better understanding of observable phenomena and to describe and explain their laws.
Independence and responsibility
- Student shares her acquired knowledge and experience through formal, non-formal and informal information transfer with those in her field.
Prerequisites for completing the course
|
Knowledge type competencies
(a set of prior knowledge, the existence of which is not obligatory, but greatly facilitates the successful completion of the subject) |
none |
|
Ability type competencies
(a set of prior abilities and skills, the existence of which is not obligatory, but greatly contributes to the successful completion of the subject) |
none |